PATRICK
HUGHES INC.
![NYS-Certified-Logo[11742].png](https://static.wixstatic.com/media/01088f_4cadec29faa44d18bb4fedea37de231d~mv2.png/v1/fill/w_305,h_40,al_c,q_85,usm_0.66_1.00_0.01,enc_auto/NYS-Certified-Logo%5B11742%5D.png){kind=small}
Products
SafePro Safety is a national manufacturer of rooftop safety, fall protection and security solutions. SafePro products include SafePro™ roof hatches, roof hatch safety rails, automatic roof hatch openers, perimeter safety rails and safety accessories.
We provide patented SafePro Automatic Roof Hatch Opener and SafePro Roof Hatch Rails that were developed by commercial roofing professionals with over 30 years of experience.
Are you protecting your employees by reducing fall hazard risks?
If installing or maintaining a roof system without proper rooftop fall protection, it is not OSHA compliant.
To work safely, the right equipment must be used to prevent falls.
Whether it is a new roof, re-roof or maintenance job, rooftop safety protection is essential. Roofing construction and maintenance work at heights puts employees at risk for falls. Workers making roof repairs face potential fall hazards with increased risk due to possible rooftop integrity loss, weatherproofed surfaces and open areas such as roof access, perimeter edge and debris removal areas. In all conditions, employers must assess the hazards and implement measures to reduce falls.
No rooftop fall protection is as safe or as simple as SafePro safety systems. SafePro is the only manufacturer to offer customized rooftop safety solutions and the exclusive Automatic Roof Hatch Opener. Our products meet and exceed OSHA requirements, are easy to install and require no special tools. SafePro safety solutions do not penetrate the roof or compromise the roofing system warranty. We continuously strive to engineer safety offerings to protect lives and prevent potential hazards.
ROOF HATCH RAILS: SafePro’s Roof Hatch Safety Rail and Ladder Extension is a 4-sided rail system with ergonomic hand grip side rails, a self-closing gate with no pinch hinges, & integrated ladder extension rails that will hold steady in the event of a slip during ladder use and comply with OSHA standards.
SAFEGUARD: SafeGuard serves as a temporary hazard brace during rooftop construction or for long term applications. Blasted, Non-Penetrating Steel Bases are built to last and will not void existing rooftop warranty. SafeGuard can be configured as a 4-sided structure to guard skylights and other rooftop fall hazards, or ground-level for multiple uses. An easily customizable Powder-coated system in any color or choose a galvanized finish.
-
Prevent injuries and save lives
-
Mitigate risks to building owners, property managers and roofing professionals
-
Provide OSHA compliance
-
Improve building security
.jpg)
Protectosil ANTIGRAFFITI
Protectosil ANTIGRAFFITI® by Evonik protects surfaces to allow easy removal of a wide variety of graffiti, including spray paint, permanent marker, ink, bituminous paints, asphalt sealers, and other solvent or water-borne paints.
Because of Protectosil ANTIGRAFFITI®’s superior performance, standard non hazardous cleaners and low-pressure water blasting are sufficient removal methods for most graffiti. Protectosil ANTIGRAFFITI® is breathable and will not alter the natural appearance of the substrate. These properties make the product ideal for masonry walls.
Protectosil ANTIGRAFFITI® is based on silane chemistry. It will chemically bond to the substrate. This allows the material to undergo many cleaning cycles before retreatment is necessary. Protectosil ANTIGRAFFITI® is especially suited for application when solvent-borne products are not acceptable, as in states that have VOC regulations for AIM coatings. Protectosil ANTIGRAFFITI® is VOC compliant in all 50 states.
Evonik - Protectosil Waterproofing
The porous nature of many substrates allows water and dissolved contaminants to penetrate via capillary suction into the pores. This may cause various problems such as corrosion of reinforcing steel, salt burst, or freeze-thaw damage.
There is no doubt that by preventing water ingress into a structure, damage is drastically reduced. To determine the right Protectosil® product for your project see our product selection guide.
BUT THE KEY QUESTION IS HOW?
Treatment with water repellents – called "hydrophobation" - using Protectosil® building protection products is unique. Protectosil® water repellent products penetrate deep into the substrate. They keep water out and maintain the substrate‘s water vapor permeability. By contrast, film-forming coatings may block the pores of the surface. The large molecules in polymeric water repellent coatings seal the pores of the substrate and may stop it from breathing.
Water is kept out, but water vapor generated from within remains trapped, causing damage such as spalling. In addition, the surface coating breaks down due to UV radiation, allowing water to penetrate once again.
DEPTH OF PENETRATION PROVIDES OPTIMUM PROTECTION
Protectosil® water-repellent molecules are small enough to penetrate the smallest pores of most substrates. Coupled with their ability to chemically bond to the substrate provides a long lasting water repellent treatment. External water is kept from entering the pores, while water vapor from within the structure can still escape.
The Protectosil® treated structure remains breathable. This technology has two major advantages: Neither UV radiation nor mechanical wear can erase and thus weaken the Protectosil® protection.
